yes
Server operating system + version
Linux khdebian.mydomain.com 6.1.0-13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.55-1 (2023-09-29) x86_64
Server virtualization technology used
TrueNAS / KVM
KeyHelp version + build number
23.2 (Build 3097)
Problem description / error messages
While testing my KeyHelp on my local network the DHCP address it got was 10.0.0.137 which worked as expected. I then changed the IP to a static IP address of 10.0.0.250
I connected into the server (10.0.0.250) by using puttty/SSH and when I log in I am greeted with
Code: Select all
--------------------------------------------------
This server is powered by KeyHelp!
* Control panel access:
https://khdebian.mydomain.com
https://10.0.0.137
* Login data:
/root/keyhelp_login_data_*
* CLI utilities:
# keyhelp
# keyhelp-toolbox
--------------------------------------------------
Code: Select all
root@khdebian:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 00:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
altname enp0s3
inet 10.0.0.250/24 brd 10.0.0.255 scope global ens3
valid_lft forever preferred_lft forever
inet6 fe80::xxx:xxxx:xxxx:xxxx/64 scope link
valid_lft forever preferred_lft forever
root@khdebian:~#
Expected result
All domains to have the 10.0.0.137 IP in their DNS updated to 10.0.0.250
The login details as shown above to show
Code: Select all
* Control panel access:
https://khdebian.mydomain.com
https://10.0.0.250
All domains were updated to 10.0.0.250 except the KeyHelp domain khdebain.mydomain.com which is still on 10.0.0.137
Steps to reproduce
Change the network card IP address via the command line.
Additional information
This is a fresh copy of KeyHelp that I am messing about with.
There is no way to edit the DNS zone through KeyHelp and the IP update process does not update the KeyHelp domain.
I have not tried changing it in the config files manually as I think this is a bug.